Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1068 (VEHICLE DIAGNOSTIC INFORMATION)SPECIFICATIONSDOOR LOCK CONTROL MODULE SCAN TOOL INFORMATION (PASSENGER DOOR SWITCH)
2006 Pontiac G6 GTP, 2D Coupe, Standard
Door Lock Control Module Scan Tool Information (Passenger Door Switch)
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Door Lock Control Module Scan Tool Information (Passenger Door Switch)
WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Passenger Door Switch Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Battery Voltage Signal | - | Varies | This displays volts. This is the voltage input supplied to the passenger door switch. |
| Door Key Cyl. Unlock Switch | - | Idle | The scan tool displays Idle or Unlock. This is the state of the passenger door key cylinder unlock switch. |
| Door Lock Actuator Cmd. | - | Off | The scan tool displays Off, Unlock or Lock. This is the state of the door lock actuator. |
| Ext. Psgr. Door Handle Switch | - | Inactive | The scan tool displays Active or Inactive. This is the state of the exterior passenger door handle switch. |
| Front Window Motor Fault Status | - | No Fault | The scan tool displays No Fault, Motor Fault, Hall Fault, Memory Fault, LIN Fault, Anti-Trap Fault, Thermo-Active, Not Normalized. This is the status of the front window motor faults. |
| Front Window Motor Status | - | Off | The scan tool displays Off, Up, Down, Reverse, Vent Open/Short, Closed. This is the status of the front window motor when commanded on. |
| Memory Switch Backlight | - | Varies | The scan tool displays %. This is the intensity of the backlighting in the memory switch. |
| Passenger Door Ajar Sw. | - | Inactive | The scan tool displays Active or Inactive. This is the state of the passenger door ajar switch. |
| Passenger Door Open Sw. | - | Inactive | The scan tool displays Active or Inactive. This is the state of the passenger door open switch. |
| Passenger Window Switch | - | Off | The scan tool displays Off, Up, Down, Express Up or Express Down. This is the state of the driver left front window switch. |
| Seat Back Heat Mode Ind. Cmd. | - | Off | The scan tool displays On or Off. This is the state of the seat back heat mode indicator. |
| Seat Back Heat Mode Sw. | - | Inactive | The scan tool displays Active or Inactive. This is the state of the seat back heat mode switch. |
| Seat Cool Mode Ind. Cmd. | - | Off | The scan tool displays On or Off. This is the state of the seat cool mode indicator. |
| Seat Cool Mode Switch | - | Off | The scan tool displays On or Off. This is the state of the seat cool mode switch. |
| Seat Heat High Ind. Cmd. | - | Off | The scan tool displays On or Off. This is the state of the seat heat high indicator. |
| Seat Heat Medium Ind. Cmd. | - | Off | The scan tool displays On or Off. This is the state of the seat heat medium indicator. |
| Seat Heat Low Ind. Cmd. | - | Off | The scan tool displays On or Off. This is the state of the seat heat low indicator. |
| Seat Heat Mode Cmd. | - | Off | The scan tool displays On or Off. This is the state of the seat heat mode. |
| Seat Heat Mode Sw. | - | Inactive | The scan tool displays Active or Inactive. This is the state of the seat heat mode switch. |
| VIN Learned | - | Yes | The scan tool displays Yes or No. This is the state of the passenger door switch VIN programming. |
| Window Switch Backlight | - | Varies | The scan tool displays %. This is the intensity of the backlighting in the window switch. |
Passenger Door Switch Scan Tool Output Controls
| Output Control | Description |
|---|---|
| Door Deadbolt Lock/Unlock | This command will lock and unlock the passenger door dead bolt actuator. |
| Door Lock/Unlock | This command will lock and unlock the passenger door lock actuator. |
| Front Window Motor | This test will command the front window both Up and Down. |
| Heated Seat Indicators | This will command the heated seat indicators ON and OFF. |
| Integrated Sw. Backlighting Test | The scan tool commands the % intensity of the integrated switches backlighting. |
| Mirror Heater | This will command the passenger mirror heater ON and OFF. |
| Mirror Left/Right | This will command the passenger mirror left and right. |
| Mirror Up/Down | This will command the passenger mirror up and down. |
| Non-Integrated Sw. Backlighting Test | The scan tool commands the % intensity of the non-integrated switches backlighting. |
| Puddle/Courtesy Lamp | This will command the courtesy lamps ON and OFF. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.