Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 105 (POWER STEERING SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Pontiac G6 GTP, 2D Coupe, Standard
Fastener Tightening Specifications
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Inner Tie Rod | 100 N.m | 74 lb ft |
| O-Ring Union Fitting | 75 N.m | 55 lb ft |
| Outer Tie Rod End Nut | 46 N.m | 34 lb ft |
| Power Steering Cooler Pipe/Hose Mounting Bolt | 10 N.m | 89 lb in |
| Power Steering Gear Cylinder Line Fittings | 17 N.m | 13 lb ft |
| Power Steering Gear Mounting Bolts | 90 N.m | 66 lb ft |
| Power Steering Pipe Fittings (3.8L) | 27 N.m | 20 lb ft |
| Power Steering Pipes at Steering Gear (3.6L) | 27 N.m | 20 lb ft |
| Power Steering Pressure Hose Retainer Bolt (3.6L) | 9 N.m | 80 lb in |
| Power Steering Pressure Hose to Pump (3.6L) | 40 N.m | 30 lb ft |
| Power Steering Pressure Hose to Pump (3.8L) | 27 N.m | 20 lb ft |
| Power Steering Pump Bracket to Engine Mounting Bolts (3.6L) | 50 N.m | 37 lb ft |
| Power Steering Pump Flow Control Valve Union Fitting | 75 N.m | 55 lb ft |
| Power Steering Pump Mounting Bolts (3.8L) | 25 N.m | 18 lb ft |
| Power Steering Pump to Bracket Mounting Bolts (3.6L) | 22 N.m | 16 lb ft |
| Power Steering Remote Reservoir Bracket Bolt, Lower M8 (3.6L) | 25 N.m | 18 lb ft |
| Power Steering Remote Reservoir Bracket Bolts, Upper M6 (3.6L) | 9 N.m | 80 lb in |
| Power Steering Remote Reservoir to Reservoir Bracket Screws (3.6L) | 6 N.m | 53 lb in |
| Rack Bearing Preload Lock Nut | 68 N.m | 50 lb ft |
| Tie Rod End Jam Nut | 68 N.m | 50 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.