Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1046 (LIGHTING SYSTEMS)REPAIR INSTRUCTIONSLICENSE LAMP BULB REPLACEMENT
2006 Pontiac G6 GTP, 2D Coupe, Standard
License Lamp Bulb Replacement
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION License Lamp Bulb Replacement
WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications . |
|
| 1 | Rear License Plate Lamp Screws (Qty: 4) Tighten: 2 N.m(18 lb in) |
| 2 | Rear License Plate Lamp Lens (Qty: 2) Tip: Push the lens forward then pull outward from the rear bumper fascia opening. |
| 3 | License Plate Lamp Socket Tip: Twist the lamp socket electrical connector counterclockwise and remove from the lens. |
| 4 | Rear License Plate Lamp Bulb (Qty: 2) Tip: Pull the bulb straight from the socket. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.