Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1046 (LIGHTING SYSTEMS)REPAIR INSTRUCTIONSFRONT FOG LAMP BULB REPLACEMENT
2006 Pontiac G6 GTP, 2D Coupe, Standard
Front Fog Lamp Bulb Replacement
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Front Fog Lamp Bulb Replacement
WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications . Remove either the LF or RF forward wheelhouse liner. Refer to Front Wheelhouse Liner Replacement . Preliminary Procedure: Disconnect the electrical connector from the fog lamp bulb socket assembly. |
|
| 1 | Front Fog Lamp Bulb
CAUTION:
Refer to Halogen Bulb Caution
. Tip: Disconnect the fog lamp bulb socket from the fog lamp housing by rotating the bulb socket a quarter turn counterclockwise. |
| 2 | Fog Lamp Housing |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.