Fastener Tightening Specifications

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Antenna Shaft Bolt 6 N.m 53 lb in
Cellular Antenna Mast Screw 1 N.m 9 lb in
Communication Interface Module Bolt 4 N.m 36 lb in
Digital Radio Receiver Nut 10 N.m 89 lb in
Radio Antenna Module Bolts 2 N.m 18 lb in
Radio Screws 2 N.m 18 lb in
Radio Front Side Door Screw 2 N.m 18 lb in
Radio Rear Speaker Screws 2 N.m 18 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.