Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISENGINE PERFORMANCETESTING & DIAGNOSISENGINE CONTROL SYSTEM - 3.9L - DTC P2077 TO DTC P2A04DTC P2077 OR P2078TYPICAL SCAN TOOL DATA
2006 Pontiac G6 GTP, 2D Coupe, Standard
Typical Scan Tool Data
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Typical Scan Tool Data
IMT Valve Position
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions:Β Ignition ON Engine OFF. Normal range is open. | |||
| IMT Valve Ignition Voltage | open | open | open |
| IMT Valve Ground | open | open | -- |
| IMT Valve Control | closed | open | open |
| IMT Valve Signal | closed | open | open |
IMT Valve Feedback
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions:Β Ignition ON Engine OFF. Normal range is 18.4-25.2% | |||
| IMT Valve Ignition Voltage | 0% | 0% | no effect 18.4-25.2% |
| IMT Valve Ground | no effect 18.4-25.2% |
0% | -- |
| IMT Valve Control | 78% | 18.4-25.2% | 18.4-25.2% |
| IMT Valve Signal | 100% | 0% | 0% |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.