Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISBODY & FRAMESEATSSEAT SYSTEMREPAIR INSTRUCTIONSHEATED SEAT CONTROL MODULE REPLACEMENT - FRONTINSTALLATION PROCEDURE

2006 Pontiac G6 GTP, 2D Coupe, Standard

Installation Procedure

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Installation Procedure

Fig 1: View Of Heated Seat Control Module

GM1333141

Courtesy of GENERAL MOTORS CORP.

Install the heated seat control module.

Fig 2: View Of Fastener From Heated Seat Control Module

GM1333139

Courtesy of GENERAL MOTORS CORP.

Install the fastener to the heated seat control module.

Fig 3: View Of Electrical Connection At Heated Seat Control Module

GM1333137

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connection to the heated seat control module.
Install the front seat. Refer to Seat Replacement - Front Bucket .
Verify that the heated seat works correctly.
Refer to Control Module References for programming and setup information.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.