Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2005SUNFIRE L4-2.2L VIN FREPAIR AND DIAGNOSISINSTRUMENT PANEL, GAUGES AND WARNING INDICATORSDASHBOARD / INSTRUMENT PANELSERVICE AND REPAIRINSTRUMENT PANEL (IP) - TRIM PANEL REPLACEMENT - RIGHT
2005 Pontiac Sunfire L4-2.2L VIN F
Instrument Panel (IP) - Trim Panel Replacement - Right
2005 Pontiac Sunfire L4-2.2L VIN FSECTION Instrument Panel (IP) - Trim Panel Replacement - Right
Instrument Panel (I/P) Trim Panel Replacement - Right
Removal Procedure
1. Open the instrument panel (I/P) compartment door to access the right I/P trim panel (3).
2. Remove the I/P accessory trim plate.
3. Remove the screws (1) from the RH I/P trim panel (3).
4. Remove the right I/P trim panel (3) from the I/P (2).
Installation Procedure
1. Position the right I/P trim panel (3) to the I/P (2).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the right I/P trim screws (1).
Tighten the screws to 2.3 N.m (20 lb in).
3. Install the I/P accessory trim plate.
4. Close the I/P compartment door.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.