Seat Back Replacement - Front

2005 Pontiac Montana SV6 AWDSECTION Seat Back Replacement - Front
Fig 1: View Of Front Seat Back
GM1527375Courtesy of GENERAL MOTORS CORP.
Seat Back Replacement - Front

Callout Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices.
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the front bucket seat. Refer to Seat Replacement - Front Bucket .
1 Handle, Seat Recliner
Refer to Seat Back Recliner Handle Replacement - Front .
2 Plug, Seat Recliner Handle
3 Cover, Seat Outer Adjuster
Refer to Seat Adjuster Track Cover Replacement - Front .
4 Tray Assembly, Seat Storage
Refer to Storage Tray Replacement - Front Seat .
5 Cover, Seat Outer Adjuster
Refer to Seat Adjuster Track Cover Replacement - Front .
6 Cover, Seat Inner Adjuster
Refer to Seat Adjuster Track Cover Replacement - Front .
7 Bolt, Seat Back Recliner (Qty: 4)

Tighten:  48 N.m (35 lb ft)

8 Seat Back Assembly
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.