SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2005MONTANA SV6 AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTWIPER/WASHER SYSTEMSWIPER SYSTEM & WASHER SYSTEMREPAIR INSTRUCTIONSWASHER NOZZLE REPLACEMENT - FRONTINSTALLATION PROCEDURE
2005 Pontiac Montana SV6 AWD

Installation Procedure

2005 Pontiac Montana SV6 AWDSECTION Installation Procedure
  1. Position the washer nozzle hose to the wiper arm.
    2. Fig 1: View Of Washer Nozzle Hose Y-Fitting
    GM812678Courtesy of GENERAL MOTORS CORP.
  2. Connect the washer nozzle hose Y-fitting to the washer hose.
    3. Fig 2: View Of Upper Washer Nozzle Hose
    GM812679Courtesy of GENERAL MOTORS CORP.
  3. Install the upper washer nozzle hose to the wiper arm.
    4. Fig 3: View Of Upper Washer Nozzle
    GM812677Courtesy of GENERAL MOTORS CORP.
  4. Connect the upper washer nozzle to the upper washer nozzle hose.
  5. Position the upper washer nozzle to the wiper arm, pressing in until fully seated.
    6. Fig 4: View Of Lower Washer Nozzle
    GM812676Courtesy of GENERAL MOTORS CORP.
  6. Position the lower washer nozzle to the wiper arm, pressing in until fully seated.
  7. Inspect the washers for proper operation.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.