Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2005GRAND PRIX V6-3.8L SC VIN 4REPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINAUTOMATIC TRANSMISSION/TRANSAXLESERVICE AND REPAIROVERHAUL50. FORWARD BAND ASSEMBLE
2005 Pontiac Grand Prix V6-3.8L SC VIN 4
50. Forward Band Assemble
2005 Pontiac Grand Prix V6-3.8L SC VIN 4SECTION 50. Forward Band Assemble
Forward Band Assemble
1. Inspect the forward band assembly (688) for the following conditions:
^ Damaged or severely worn friction material
^ Damaged apply or anchor pin features
2. Inspect the thrust washer/bearing (691) from the differential carrier internal gear for damage.
3. Position the transmission case so that the flange for the case cover is facing up.
4. Install the thrust washer/bearing (691) for the differential carrier internal gear into the case. Position as indicated.
5. Install the forward band assembly (688) into the case.
^ Locate the band assembly onto the forward band anchor pin
^ Position the band apply pin feature in the opening of the case
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.