Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2005GRAND PRIX V6-3.8L SC VIN 4REPAIR AND DIAGNOSISENGINE, COOLING AND EXHAUSTENGINESERVICE AND REPAIROVERHAULREPAIR INSTRUCTIONS92. OIL LEVEL INDICATOR AND TUBE INSTALLATION
2005 Pontiac Grand Prix V6-3.8L SC VIN 4
92. Oil Level Indicator and Tube Installation
2005 Pontiac Grand Prix V6-3.8L SC VIN 4SECTION 92. Oil Level Indicator and Tube Installation
Oil Level Indicator and Tube Installation
1. Install the oil level indicator tube.
^ Lubricate the O-ring with engine oil and make sure it is in place.
^ Make sure the assembly is fully seated in the engine block.
2. Install the oil level indicator tube nut.
Tighten the nut to 19 Nm (14 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the oil level indicator.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.