Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2004VIBE AWD L4-1.8L VIN 8REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSCLUTCH, M/TSYSTEM SPECIFICATIONS
2004 Pontiac Vibe AWD L4-1.8L VIN 8
System Specifications
2004 Pontiac Vibe AWD L4-1.8L VIN 8SECTION System Specifications
Fastener Tightening Specifications
Use J 26900-5 in order to measure the clutch disc
(1) wear. Measure the depth of each rivet head depression
(2). The following specifications are standard rivet head depth measurements:
Replace the clutch disc if the clutch rivet depth is less than 0.3 mm (0.012 inch).
Use J 26900-5 in order to measure the clutch disc
(1) wear. Measure the depth of each rivet head depression
(2). The following specifications are standard rivet head depth measurements:
Replace the clutch disc if the clutch rivet depth is less than 0.3 mm (0.012 inch).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.