Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2004VIBE AWD L4-1.8L VIN 8REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTTRANSMISSION CONTROL SYSTEMSTESTING AND INSPECTIONSCAN TOOL DATA LISTMU5 AUTOMATIC TRANSAXLE
2004 Pontiac Vibe AWD L4-1.8L VIN 8
MU5 Automatic Transaxle
2004 Pontiac Vibe AWD L4-1.8L VIN 8SECTION MU5 Automatic Transaxle
Transmission Scan Tool Data List
The Transmission Scan Tool Data List contains all Transmission related parameters that are available on the scan tool. The list is arranged in alphabetical order.
Use the Transmission Scan Tool Data List only after performing the following inspections:
^ Powertrain On-Board Diagnostic System Check is completed.
^ No Diagnostic Trouble Codes (DTCs) are present.
^ On-board diagnostics are functioning properly.
Scan tool values from a properly running Transmission may be used for comparison with the Transmission you are diagnosing. The Transmission Scan Tool Data List represents values that would be seen on a normal running engine.
Important: Do not use a scan tool that displays faulty data. Report the scan tool problem to the manufacturer. Use of a faulty scan tool can result in misdiagnosis and unnecessary parts replacement.
The Transmission Scan Tool Data List contains all Transmission related parameters that are available on the scan tool. The list is arranged in alphabetical order.
Use the Transmission Scan Tool Data List only after performing the following inspections:
^ Powertrain On-Board Diagnostic System Check is completed.
^ No Diagnostic Trouble Codes (DTCs) are present.
^ On-board diagnostics are functioning properly.
Scan tool values from a properly running Transmission may be used for comparison with the Transmission you are diagnosing. The Transmission Scan Tool Data List represents values that would be seen on a normal running engine.
Important: Do not use a scan tool that displays faulty data. Report the scan tool problem to the manufacturer. Use of a faulty scan tool can result in misdiagnosis and unnecessary parts replacement.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.