SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2004MONTANA VAN PASSENGERREPAIR AND DIAGNOSISRESTRAINTSAIR BAG, SRSSUPPLEMENTAL INFLATABLE RESTRAINT SYSTEMREPAIR INSTRUCTIONSINFLATABLE RESTRAINT SIDE IMPACT SENSOR REPLACEMENTINSTALLATION PROCEDURE
2004 Pontiac Montana Van Passenger

Installation Procedure

2004 Pontiac Montana Van PassengerSECTION Installation Procedure
    Fig 1: Locating Side Impact Sensor Connectors
    GM260344Courtesy of GENERAL MOTORS CORP.
  1. Connect the inflatable restraint side impact sensor yellow 2-way connector (2) to the inflatable restraint side impact sensor (1).
  2. Install the CPA to the inflatable restraint side impact sensor yellow 2-way wiring harness connector (2).
  3. Install the inflatable restraint side impact sensor (1) to the center pillar.
    4. Fig 2: Locating Inflatable Restraint Side Impact Sensor Fasteners
    GM260342Courtesy of GENERAL MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.