Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSPONTIAC2004GTO STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALBODY ELECTRICALOEM CONNECTOR END VIEWSCONNECTOR END VIEWSSTOP LAMP SWITCH C2 CONNECTOR END VIEW

2004 Pontiac GTO Standard

Stop Lamp Switch C2 Connector End View

2004 Pontiac GTO StandardSECTION Stop Lamp Switch C2 Connector End View

Courtesy of GENERAL MOTORS CORP.
Connector Part Information		2977373 2-Way F (BK)
Pin	Wire Color	Circuit No.	Function
A	YE/RD	832	Traction Control Active Signal
B	L-GN	696	Cruise Control Cancel Signal

Stop Lamp Switch C2 Connector End View

Courtesy of GENERAL MOTORS CORP.
Connector Part Information		2977373 2-Way Female (BK)
Pin	Wire Color	Circuit No.	Function
A	YE/RD	832	Traction Control Active Signal
B	L-GN	696	Cruise Control Cancel Signal

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.