Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Removal Procedure
2004 Pontiac GTO StandardSECTION Removal Procedure
- Remove the door trim panel. Refer to Trim Panel Replacement - Door .
- Disengage the electrical connectors from the power mirror switch (1).
- From behind the door trim panel, push the power mirror switch (1) free by depressing the tabs.
IMPORTANT:
When removing a power mirror switch, the ignition switch must be in the OFF position. This will eliminate the possibility of shorting out the power mirror switch when using a metal tool to remove the power mirror switch from the wiring harness.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.