Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Removal Procedure
2004 Pontiac GTO StandardSECTION Removal Procedure
- Open and raise the hood.
- Remove the upper radiator shroud. Refer to Fan Shroud Replacement in Engine Cooling.
- Disengage the primary hood latch (1) from the radiator support panel (2).
- Disengage the hood latch release cable (5) from the primary hood latch (1).
- Rotate the primary hood latch (1) in the vertical position, and remove from radiator support lower primary hood latch hole (6) and radiator support upper primary hood latch hole (7).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.