Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2004AZTEK AWD V6-3.4L VIN EREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYCONNECTING ROD BEARING
2004 Pontiac Aztek AWD V6-3.4L VIN E
Connecting Rod Bearing
2004 Pontiac Aztek AWD V6-3.4L VIN ESECTION Connecting Rod Bearing
GENERAL SPECIFICATIONS
Connecting Rod
Connecting Rod Bearing Clearance 0.18-0.062 mm (0.0007-0.017 inch)
Connecting Rod Bore Diameter 53.962-53.978 mm (2.124-2.125 inch)
Connecting Rod Bore Out-of-Round 0.008 mm (0.0002 inch)
Connecting Rod Length - Center to Center 144.75-144.81 mm (5.69-5.70 inch)
Connecting Rod Side Clearance 0.25-0.37 mm (0.010-0.015 inch)
Connecting Rod
Connecting Rod Bearing Clearance 0.18-0.062 mm (0.0007-0.017 inch)
Connecting Rod Bore Diameter 53.962-53.978 mm (2.124-2.125 inch)
Connecting Rod Bore Out-of-Round 0.008 mm (0.0002 inch)
Connecting Rod Length - Center to Center 144.75-144.81 mm (5.69-5.70 inch)
Connecting Rod Side Clearance 0.25-0.37 mm (0.010-0.015 inch)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.