Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2004AZTEK AWD V6-3.4L VIN EREPAIR AND DIAGNOSISRESTRAINTS AND SAFETY SYSTEMSAIR BAG SYSTEMSDESCRIPTION AND OPERATIONINFLATABLE RESTRAINT WIRING HARNESS
2004 Pontiac Aztek AWD V6-3.4L VIN E
Inflatable Restraint Wiring Harness
2004 Pontiac Aztek AWD V6-3.4L VIN ESECTION Inflatable Restraint Wiring Harness
INFLATABLE RESTRAINT WIRING HARNESS
The inflatable restraint wiring harness connects the inflator modules, the inflatable restraint sensing and diagnostic module (SDM), the deployment loops, and the serial data circuit together using weather-packed connectors. Supplemental inflatable restraint (SIR) system connectors are yellow for easy identification. When repairing SIR wiring harnesses, follow the proper testing and repair procedures listed in the service manual.
The inflatable restraint wiring harness connects the inflator modules, the inflatable restraint sensing and diagnostic module (SDM), the deployment loops, and the serial data circuit together using weather-packed connectors. Supplemental inflatable restraint (SIR) system connectors are yellow for easy identification. When repairing SIR wiring harnesses, follow the proper testing and repair procedures listed in the service manual.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.