Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2004AZTEK AWD V6-3.4L VIN EREPAIR AND DIAGNOSISBODY AND FRAMEDOORS, HOOD AND TRUNKDOORSTESTING AND INSPECTIONINITIAL INSPECTION AND DIAGNOSTIC OVERVIEWDIAGNOSTIC SYSTEM CHECK - DOOR SYSTEMS
2004 Pontiac Aztek AWD V6-3.4L VIN E
Diagnostic System Check - Door Systems
2004 Pontiac Aztek AWD V6-3.4L VIN ESECTION Diagnostic System Check - Door Systems
DIAGNOSTIC SYSTEM CHECK
TEST DESCRIPTION
The numbers below refer to the step numbers on the diagnostic table.
2. Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit.
The specified procedure will determine the particular condition.
5. The presence of DTCs which begin with 'U' indicate some other module is not communicating. The specified procedure will compile all the available information before tests are performed.
TEST DESCRIPTION
Steps 1-3:
Steps 4-8:
Step 9:
The numbers below refer to the step numbers on the diagnostic table.
2. Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit.
The specified procedure will determine the particular condition.
5. The presence of DTCs which begin with 'U' indicate some other module is not communicating. The specified procedure will compile all the available information before tests are performed.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.