Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2004AZTEK AWD V6-3.4L VIN EREPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTRADIO, STEREO, AND COMPACT DISCRADIO/STEREOSERVICE AND REPAIRRADIO SETUP
2004 Pontiac Aztek AWD V6-3.4L VIN E
Radio Setup
2004 Pontiac Aztek AWD V6-3.4L VIN ESECTION Radio Setup
RADIO SETUP
IMPORTANT: The Radio Setup option does not contain a submenu. Radio Setup will configure the following systems:
- Steering wheel controls
- Learn VIN
- DTCs
- Class 2 radio messages
The radio setup procedure will also clear the following messages:
- CAL
- CAL ERROR
- CALIBRATE
To properly setup the DE 100 series radio, complete the following procedure using a scan tool.
1. At the Main Menu screen, select DIAGNOSTICS.
2. At the Vehicle Identification screen, build the vehicle.
3. At the System Selection Menu screen, select BODY.
4. At the Body screen, select RADIO.
5. At the Radio screen, select SPECIAL FUNCTIONS.
6. At the Special Functions screen, select RADIO SETUP.
7. At the Radio Setup screen, select ENTER.
8. After the scan tool displays TEST COMPLETED SUCCESSFULLY, press EXIT.
9. Cycle the ignition.
Without learning the VIN, the radio will display a locked message (LOC).
RADIO TUNER CALIBRATION
IMPORTANT: The Country Code option does not contain a submenu. Country Code sets the point of sale, or origin, in the radio in order to calibrate the tuner for the country that the vehicle will be used in.
In order to calibrate the radio, begin at the Special Functions screen. Repeat the Radio Setup Procedure if needed.
At the Special Functions screen, select COUNTRY CODE.
RADIO CHIME VOLUME SELECTION
IMPORTANT: The Loud Chime Volume option does not contain a submenu. This selection is used for setting the volume when the radio is replaced.
In order to set the chime volume, begin at the Special Functions screen. Repeat the Radio Setup Procedure if needed.
1. At the Special Functions screen, select SET OPTIONS.
2. At the Set Options screen, select CHIME SETTINGS.
3. At the Chime Settings screen, select the following option:
- Loud Chime Volume
- Select the appropriate voltage/volume level.
RADIO CHIME LEVEL SELECTION
IMPORTANT: The Chime Level option does not contain a submenu. The Chime Level setting has an option of setting a normal chime or a loud chime when the radio is replaced.
In order to set the Chime Level, begin at the Special Functions screen. Repeat the Radio Setup Procedure if needed.
1. At the Special Functions screen, select SET OPTIONS.
2. At the Set Options screen, select CHIME SETTINGS.
3. At the Chime Settings screen, select CHIME LEVEL.
IMPORTANT: The Radio Setup option does not contain a submenu. Radio Setup will configure the following systems:
- Steering wheel controls
- Learn VIN
- DTCs
- Class 2 radio messages
The radio setup procedure will also clear the following messages:
- CAL
- CAL ERROR
- CALIBRATE
To properly setup the DE 100 series radio, complete the following procedure using a scan tool.
1. At the Main Menu screen, select DIAGNOSTICS.
2. At the Vehicle Identification screen, build the vehicle.
3. At the System Selection Menu screen, select BODY.
4. At the Body screen, select RADIO.
5. At the Radio screen, select SPECIAL FUNCTIONS.
6. At the Special Functions screen, select RADIO SETUP.
7. At the Radio Setup screen, select ENTER.
8. After the scan tool displays TEST COMPLETED SUCCESSFULLY, press EXIT.
9. Cycle the ignition.
Without learning the VIN, the radio will display a locked message (LOC).
RADIO TUNER CALIBRATION
IMPORTANT: The Country Code option does not contain a submenu. Country Code sets the point of sale, or origin, in the radio in order to calibrate the tuner for the country that the vehicle will be used in.
In order to calibrate the radio, begin at the Special Functions screen. Repeat the Radio Setup Procedure if needed.
At the Special Functions screen, select COUNTRY CODE.
RADIO CHIME VOLUME SELECTION
IMPORTANT: The Loud Chime Volume option does not contain a submenu. This selection is used for setting the volume when the radio is replaced.
In order to set the chime volume, begin at the Special Functions screen. Repeat the Radio Setup Procedure if needed.
1. At the Special Functions screen, select SET OPTIONS.
2. At the Set Options screen, select CHIME SETTINGS.
3. At the Chime Settings screen, select the following option:
- Loud Chime Volume
- Select the appropriate voltage/volume level.
RADIO CHIME LEVEL SELECTION
IMPORTANT: The Chime Level option does not contain a submenu. The Chime Level setting has an option of setting a normal chime or a loud chime when the radio is replaced.
In order to set the Chime Level, begin at the Special Functions screen. Repeat the Radio Setup Procedure if needed.
1. At the Special Functions screen, select SET OPTIONS.
2. At the Set Options screen, select CHIME SETTINGS.
3. At the Chime Settings screen, select CHIME LEVEL.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.