Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
DTC B0807, Battery For Door Lock Circuit (Open): Notes
BCM receives voltage for door locks at all times in order to lock and unlock all doors. When BCM commands doors to lock or unlock, voltage is supplied through circuit No. 1540 (Orange wire).
DTC B0807 will set when BCM detects an open in circuit No. 1540 (Orange wire) for more than 0.3 second when BCM commands doors to lock or unlock. No driver warning message will be displayed.
If conditions for malfunction no longer exist, history DTC will clear after 100 consecutive ignition cycles. DTC B0807 will also clear when conditions no longer exist or scan tool is used to clear codes.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.