SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC1997GRAND PRIX GTP, 4D SEDANREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTANTI-THEFT SYSTEMSKEYLESS ENTRY SYSTEM - REMOTEPROGRAMMING - PROCEDURESREMOTE UNLOCK CONTROL CUSTOMIZATION
1997 Pontiac Grand Prix GTP, 4D Sedan

Remote Unlock Control Customization

1997 Pontiac Grand Prix GTP, 4D SedanSECTION Remote Unlock Control Customization
NOTE: If ignition is turned to OFF position during RAV procedure, customization will be terminated and system will remain in most recent mode.
  1. Turn off instrument panel dimmer switch. Turn ignition to OFF position. Remove MALL PGM fuse.
  2. Turn ignition to ACC position. BCM sound chimes number of times equivalent to BCM type installed on vehicle (1-4). BCM is now in feature customization mode.
  3. To change remote unlock control mode, press and release UNLOCK button on RKE transmitter. BCM will chime a number of times equivalent to remote unlock control mode. Transition past 2 will repeat starting at mode one.
  4. To exit and save current customization, turn ignition off and replace MALL PGM fuse.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.