Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC1993LEMANS FWD L4-98 1.6LREPAIR AND DIAGNOSISMAINTENANCEALIGNMENTSERVICE AND REPAIRREAR WHEEL ALIGNMENT
1993 Pontiac Lemans FWD L4-98 1.6L
Rear Wheel Alignment
1993 Pontiac Lemans FWD L4-98 1.6LSECTION Rear Wheel Alignment
CASTER & CAMBER
Rear caster and camber angles are not adjustable. If caster or camber is found to be out of specifications, inspect suspension and related body components for damage and repair or replace as necessary.
TOE-IN
Rear toe is not adjustable. If toe is found to be out of specifications, inspect rear axle assembly and wheel spindle for damage and correct as necessary.
VEHICLE TRIM HEIGHT
Vehicle trim height is measured from the rocker panel to ground. From rocker panel front to ground should be 7.7 inches. From rocker panel rear to ground, trim height should be 7.5 inches. If trim height is not within limits, check control arms, struts and ball joints for wear and damage.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.