Injector Resistance

1991 Pontiac Firebird Formula, 5.0 F, Standard, M39SECTION Injector Resistance
INJECTOR RESISTANCE SPECIFICATIONS (1)

Application Ohms
4.9L (VIN B) 8.0-25.0
5.0L (VIN E) 1.2
5.0L (VIN F) 10.0
5.7L (VIN 7) 1.2
5.7L (VIN 8) (2)
(1) Injector resistance specification is at 140°F (60°C).
(2) All injectors should be within 1.0 ohm of each other and should not be less than 10 ohms at 70°F (21°C).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.