Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC1990GRAND PRIX STE, 3.1 VREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESENSOR RANGE CHARTSENGINE CONTROLS - SENSOR OPERATING RANGE CHARTSSENSOR OPERATING RANGE CHARTS
1990 Pontiac Grand Prix STE, 3.1 V
Sensor Operating Range Charts
1990 Pontiac Grand Prix STE, 3.1 VSECTION Sensor Operating Range Charts
COOLANT TEMPERATURE RESISTANCE VALUES (1)
| Temperature - °F (°C) | Ohms | ||
|---|---|---|---|
| 210 (100) | 185 | ||
| 160 (70) | 450 | ||
| 100 (38) | 1800 | ||
| 70 (20) | 3400 | ||
| 20 (-7) | 13,500 | ||
| 0 (-18) | 25,000 | ||
| -40 (-40) | 100,700 | ||
|
|||
MAP SENSOR VOLTAGE RANGE (1)
| Altitude - Feet | Volts | ||
|---|---|---|---|
| Below 1000 | 3.8-5.5 | ||
| 1000-2000 | 3.6-5.3 | ||
| 2000-3000 | 3.5-5.1 | ||
| 3000-4000 | 3.3-5.0 | ||
| 4000-5000 | 3.2-4.8 | ||
| 5000-6000 | 3.0-4.6 | ||
| 6000-7000 | 2.9-4.5 | ||
| 7000-8000 | 2.8-4.3 | ||
| 8000-9000 | 2.6-4.2 | ||
| 9000-10,000 | 2.5-4.0 | ||
|
|||
MANIFOLD AIR TEMPERATURE SENSOR RESISTANCE VALUES (1)
| Temperature - °F (°C) | Ohms | ||
|---|---|---|---|
| 210 (100) | 185 | ||
| 160 (70) | 450 | ||
| 100 (38) | 1800 | ||
| 70 (20) | 3400 | ||
| 40 (4) | 7500 | ||
| 20 (-7) | 13,500 | ||
| 0 (-18) | 25,000 | ||
| -40 (-40) | 100,700 | ||
|
|||
OIL TEMPERATURE SENSOR RESISTANCE TEST (CORVETTE) (1)
| Temperature - °F (°C) | Ohms | ||
|---|---|---|---|
| 210 (100) | 185 | ||
| 160 (70) | 450 | ||
| 100 (38) | 1800 | ||
| 70 (20) | 3400 | ||
| 40 (4) | 7500 | ||
| 20 (-7) | 13,500 | ||
| 0 (-18) | 25,000 | ||
| -40 (-40) | 100,700 | ||
|
|||
OXYGEN SENSOR VOLTAGE TEST (1)
| Condition | Volts | ||
|---|---|---|---|
| Lean | .1 | ||
| Rich | .9 | ||
|
|||
PRESSURE SENSOR VOLTAGE RANGE (1)
| Altitude - Feet | Volts | ||
|---|---|---|---|
| Below 1000 | 3.8-5.5 | ||
| 1000-2000 | 3.6-5.3 | ||
| 2000-3000 | 3.5-5.1 | ||
| 3000-4000 | 3.3-5.0 | ||
| 4000-5000 | 3.2-4.8 | ||
| 5000-6000 | 3.0-4.6 | ||
| 6000-7000 | 2.9-4.5 | ||
| 7000-8000 | 2.8-4.3 | ||
| 8000-9000 | 2.6-4.2 | ||
| 9000-10,000 | 2.5-4.0 | ||
|
|||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.