Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC1984PHOENIX SE, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALMECHANICAL2.8L V6 - VINS [X,Z,1]TORQUE SPECIFICATIONS
1984 Pontiac Phoenix SE, Automatic
Torque Specifications
1984 Pontiac Phoenix SE, AutomaticSECTION Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Camshaft Sprocket | 15-20 (20-27) | |
| Clutch Pressure Plate Bolts | 13-18 (18-24) | |
| Connecting Rod Cap | 34-40 (46-54) | |
| Crankshaft Pulley | 20-30 (27-41) | |
| Crankshaft Pulley Hub | 66-84 (90-115) | |
| Cylinder Head | 65-75 (88-102) | |
| Engine Strut Bracket | 30-40 (40-54) | |
| Exhaust Manifold Bolt | 22-28 (30-38) | |
| Flex Plate-to-Torque Convertor | 25-35 (34-47) | |
| Flywheel-to-Crankshaft | 45-55 (61-75) | |
| Front Cover | ||
| 8 mm | 13-18 (18-24) | |
| 10 mm | 20-30 (27-41) | |
| Intake Manifold Bolt | 20-25 (27-34) | |
| Main Bearing Cap | 63-74 (85-100) | |
| Oil Pan | ||
| 6 mm | 6-9 (8-12) | |
| 8 mm | 14-22 (19-30) | |
| Oil Pump | 26-35 (35-48) | |
| Rocker Arm Stud | 43-49 (58-66) | |
| Timing Chain Tensioner | 13-18 (18 24) | |
| Thrust Bearing Cap | 10-15 (14-20) | |
| Torsional Damper | 66-84 (90-114) | |
| Water Pump | ||
| 6 mm | 6-9 (8-12) | |
| 8 mm | 13-18 (18-24) | |
| 10 mm | 20-30 (27-41) | |
| Water Pump Pulley | 13-18 (18-24) | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.