Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC1984FIREBIRD BASE, 5.0 H, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCEADJUSTMENTTUNE-UP - 2.8L V6 VIN [1]FUEL SYSTEMFUEL PUMP SPECIFICATIONS
1984 Pontiac Firebird Base, 5.0 H, Automatic
Fuel Pump Specifications
1984 Pontiac Firebird Base, 5.0 H, AutomaticSECTION Fuel Pump Specifications
Make all tests at slow (hot) idle speed. For models with fuel return line, pinch off return line. For vacuum test, connect vacuum gauge to inlet side of pump.
FUEL PUMP PERFORMANCE
| Application | Specification | |
|---|---|---|
| Mechanical Pump | ||
| Pressure (idle) | 5.5-6.5 psi (.39-.46 kg/cm2 ) | |
| Vacuum | Minimum 15 in. Hg | |
| Volume | 1 pint (.5L) in 30 sec. | |
| Electric Pump Pressure | 4-13 psi | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.