Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC19846000 L4-151 2.5LREPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINMANUAL TRANSMISSION/TRANSAXLESERVICE AND REPAIROVERHAULDISASSEMBLETRANSAXLE CASE & CLUTCH HOUSING SEPARATION
1984 Pontiac 6000 L4-151 2.5L
Transaxle Case & Clutch Housing Separation
1984 Pontiac 6000 L4-151 2.5LSECTION Transaxle Case & Clutch Housing Separation
1. Refer to accompanying image, and proceed as follows:
a. Ensure transaxle is in Neutral, then remove attaching bolts (81) and clutch housing (20).
b. Remove differential gear assembly (57).
c. Remove magnet (203) and bearing (55).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.