Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC19842000 SUNBIRD BASE, 2D HATCHBACK, 1.8 J, STANDARDREPAIR AND DIAGNOSISENGINE PERFORMANCEADJUSTMENTTUNE-UP - 2.0L 4-CYL VIN [P]FUEL SYSTEMFUEL PUMP SPECIFICATIONS
1984 Pontiac 2000 Sunbird Base, 2D Hatchback, 1.8 J, Standard
Fuel Pump Specifications
1984 Pontiac 2000 Sunbird Base, 2D Hatchback, 1.8 J, StandardSECTION Fuel Pump Specifications
WARNING:
To reduce hazard of fire or personal injury, pressure in fuel system must be relieved before any part of fuel system is serviced or repaired. To relieve pressure, remove fuel pump fuse. Run engine until it stops, then crank for an additional 3 seconds. Check fuel system for leaks before restarting engine.
FUEL PUMP SPECIFICATIONS
| Application | Specification |
|---|---|
| Pressure (At Idle) | 9.0-13.0 psi (.63-.91 kg/cm2 ) |
| Volume (At Idle) | 1.0 pint (.5L) in 25 seconds |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.