Alignment Specifications

1983 Pontiac Grand Prix Base, 5.0 HSECTION Alignment Specifications
WARNING: This page is about a different car, the 1985 Oldsmobile Ninety-Eight, 1985 Cadillac Fleetwood, 1985 Cadillac DeVille, and 1985 Buick Electra. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS

Application Preferred Range
Camber (Degrees) Front 3/4 1/4 to 1 1/4
Camber (Degrees) Rear N/A N/A
Caster (Degrees) Front 3 2 1/2 to 3 1/2
Caster (Degrees) Rear N/A N/A
Toe-In (Inches) Front 3/5 2/5 to 4/5
Toe-In (Inches) Rear N/A N/A
Toe-In (Degrees) Front 3/10 2/10 to 4/10
Toe-In (Degrees) Rear N/A N/A
Toe-Out On Turns (Degrees) N/A N/A
Steering Axis Inclination (SAI) N/A N/A
Wheelbase (Inches) 110.8 N/A
Wheelbase (Millimeters) 2814 N/A
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.