Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC1983GRAND PRIX BASE, 5.0 HREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 3 (ENGINE REMOVAL)TORQUE SPECIFICATIONSV6
1983 Pontiac Grand Prix Base, 5.0 H
Torque Specifications: V6
1983 Pontiac Grand Prix Base, 5.0 HSECTION V6
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1983 Buick Skylark, 1983 Buick Skyhawk, 1983 Buick Riviera, 1983 Buick Regal, and 1983 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS (V6)
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| 2.8L (173") | ||
| Engine Mounting Bracket-to-Engine | 70-92 (95-125) | |
| Engine Mounting Torque Strut Bracket | 30-40 (41-54) | |
| Flywheel-to-Torque Converter | 25-35 (34-47) | |
| Starter-to-Engine | 26-37 (35-50) | |
| Transmission-to-Engine | 48-63 (65-85) | |
| 3.0L (181") | ||
| Flywheel-to-Crankshaft | 60 (81) | |
| Starter-to-Engine | 35 (48) | |
| Transaxle Brace-to-Transaxle | 26-37 (35-50) | |
| Transaxle Brace-to-Engine Mounting Bracket | 66 (90) | |
| Transmission-to-Engine | 55 (75) | |
| 3.8L (231") & 4.1L (252") | ||
| Flywheel-to-Crankshaft | 60 (81) | |
| Motor Mount-to-Crossmember | 33 (45) | |
| Motor Mount-to-Engine | 59 (80) | |
| Motor Mount Through Bolt | 48 (65) | |
| Starter-to-Engine | 35 (48) | |
| Transmission-to-Engine | 35 (48) | |
| 4.3L (262") Diesel | ||
| Flywheel-to-Torque Converter | 35 (48) | |
| Motor Mount-to-Engine | 37 (50) | |
| Motor Mount-to-Frame | 38 (52) | |
| Motor Mount Through Bolt | 55 (75) | |
| Starter-to-Engine | 32 (43) | |
| Transmission-to-Engine | 35 (48) | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.