Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Valve Guide Servicing
Insert valve with valve head positioned 1/16" above valve seat. Attach dial indicator to cylinder head. Position dial indicator stem against valve stem just above valve guide. Rock valve in guide and measure guide wear as shown on indicator.
If valve guide wear is excessive, ream valve guide to next size oversize. Service valves are available in standard, .003", .015" and .030" (.076, .381 and .762 mm) oversize.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.