SYS.OK|MANUAL.DB● LIVE
1983 Pontiac 6000 LE, 2D Coupe, 2.8 X

Quick Lookups: Fluids

1983 Pontiac 6000 LE, 2D Coupe, 2.8 XSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Refrigerant 2.75 LBS. 1.24 KG R-12 S
Automatic Transmission Fluid Refill After Disassembly 12.00 PTS. 5.67 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Automatic Transmission Fluid Refill After Draining 8.00 PTS. 3.78 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Engine Coolant Eng VIN X w/Air Cond 11.70 QTS. 11.07 L 50/50 mixture of Ethylene Glycol Base Antifreeze and water GM Specification 1825-M. S
Engine Coolant Eng VIN X w/Heavy Duty Radiator 12.00 QTS. 11.35 L 50/50 mixture of Ethylene Glycol Base Antifreeze and water GM Specification 1825-M. S
Engine Coolant Eng VIN X w/o Air Cond 11.30 QTS. 10.69 L 50/50 mixture of Ethylene Glycol Base Antifreeze and water GM Specification 1825-M. S
Engine Oil 2.8L Eng 4.00 QTS. 3.78 L SAE 5W-30 (Below -20Deg.F to 60Deg.F), 10W-30/40 (0Deg.F to over 100Deg.F), 15W-40 (10Deg.F to over 100Deg.F), 20W-20/40/50 (20Deg.F to over 100Deg.F), 30 (40Deg.F to over 100Deg.F) S
Fuel Tank Eng VIN X 16.40 GALS. 62.08 L S
Manual Transmission Fluid N/A N/A Automatic Transmission Fluid DEXRON II S
Power Steering Fluid N/A N/A GM Power Steering Fluid GM Part No. 1050017. S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.