Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPLYMOUTH1997BREEZE L4-2.0L VIN CREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSBODY CONTROL MODULEDESCRIPTION AND OPERATIONRADIO-CCD3.8.1 DIAGNOSTICS
1997 Plymouth Breeze L4-2.0L VIN C
3.8.1 Diagnostics
1997 Plymouth Breeze L4-2.0L VIN CSECTION 3.8.1 Diagnostics
DIAGNOSTICS
The RBS radio has several diagnostic messages that may be displayed in the event of a problem with either the radio or the CD changer option. These messages will be displayed on the radio faceplate in the following abbreviated form. The messages are as follows:
Display Definition
E L-SP LEFT CHANNEL SHORT
E R-SP RIGHT CHANNEL SHORT
E EJCT CANNOT EJECT TAPE
E LOAD CANNOT LOAD TAPE
E PLAY CANNOT PLAY TAPE
The following messages are for the CD changer options;
E HOT THE CD CHANGER INTERNAL TEMPERATURE IS TOO HIGH
E E-O1 CD CHANGER DEADLOCK (CD JAMMED, CAN'T LOAD OR EJECT)
E E-06 CD CHANGER ELEVATOR ERROR
E E-07 MAGAZINE EJECT ERROR
E EEEE COMMUNICATIONS ERROR (BETWEEN RADIO AND CHANGER)
E PLAY CANNOT READ ALL DISCS
The left channel short, right channel short and communication error between the radio and CD changer are addressed in the diagnostics. Generally, the rest of the messages will require removal and repair of either the radio or the CD changer.
NOTE: When using the diagnostic manual for troubleshooting radio systems, all voltages are D.C. unless otherwise specified.
The RBS radio has several diagnostic messages that may be displayed in the event of a problem with either the radio or the CD changer option. These messages will be displayed on the radio faceplate in the following abbreviated form. The messages are as follows:
Display Definition
E L-SP LEFT CHANNEL SHORT
E R-SP RIGHT CHANNEL SHORT
E EJCT CANNOT EJECT TAPE
E LOAD CANNOT LOAD TAPE
E PLAY CANNOT PLAY TAPE
The following messages are for the CD changer options;
E HOT THE CD CHANGER INTERNAL TEMPERATURE IS TOO HIGH
E E-O1 CD CHANGER DEADLOCK (CD JAMMED, CAN'T LOAD OR EJECT)
E E-06 CD CHANGER ELEVATOR ERROR
E E-07 MAGAZINE EJECT ERROR
E EEEE COMMUNICATIONS ERROR (BETWEEN RADIO AND CHANGER)
E PLAY CANNOT READ ALL DISCS
The left channel short, right channel short and communication error between the radio and CD changer are addressed in the diagnostics. Generally, the rest of the messages will require removal and repair of either the radio or the CD changer.
NOTE: When using the diagnostic manual for troubleshooting radio systems, all voltages are D.C. unless otherwise specified.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.