Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPLYMOUTH1994SUNDANCE BASE, 2D HATCHBACK, 2.2 D, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 21 (ANTI-LOCK BRAKE SYSTEM)TORQUE SPECIFICATIONS
1994 Plymouth Sundance Base, 2D Hatchback, 2.2 D, Automatic
Torque Specifications
1994 Plymouth Sundance Base, 2D Hatchback, 2.2 D, AutomaticSECTION Torque Specifications
WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Banjo Bolt | 35 (48) |
| Brake Tubes-To-All Fittings | 13 (17) |
| Caliper Bleed Screw | 11 (15) |
| Caliper Guide Pin Bolt | 30 (41) |
| Caliper-To-Knuckle Bolt | 15 (20) |
| Master Cylinder-To-Booster Nut | 21 (28) |
| Power Booster Assembly-To-Dash Nut | 21 (28) |
| Wheel Lug Nut | 81-100 (110-135) |
| INCH Lbs. (N.m) | |
| CAB-To-HCU Screw | 106 (12) |
| Brakelight Switch Bracket Screw | 71 (8) |
| Front Hose Intermediate Bracket Bolt | 106 (12) |
| Proportioning Valve | 106 (12) |
| Wheel Cylinder Bleed Screw | 89 (10) |
| Wheel Cylinder Mounting Bolt | 71 (8) |
| Wheel Speed Sensor Screw | 60 (7) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.