Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPLYMOUTH1994LASER RS TURBO, AWD, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSFLUIDS
1994 Plymouth Laser RS Turbo, AWD, Automatic
Quick Lookups: Fluids
1994 Plymouth Laser RS Turbo, AWD, AutomaticSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 7.25 OZS. | 0.21 L | PAG 46 | S | |||
| Air Cond Refrigerant | 2.06 LBS. | 0.93 KG | R-12 | S | |||
| Automatic Transmission Fluid | 2.0L Eng | 7.40 QTS. | 7 L | Automatic Transmission Fluid Plus Type 7176/Automatic Transmission Fluid DIAMOND SP or equivalent | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Differential Gear Oil | 0.74 QTS. | 0.7 L | API - GL-5, SAE 75W-90, 75W or 85W | S | |||
| Engine Coolant | 2.0L Eng | 7.60 QTS. | 7.19 L | Antifreeze Permanent-Type Coolant/High quality Ethylene Glycol Antifreeze | Includes: .74 qt. in reserve tank. | S | |
| Engine Oil | w/Filter | 4.50 QTS. | 4.25 L | API - SG or SG/CD, SAE 5W-30 (Below 60Deg.F), 10W-30 (Above -10Deg.F), 20W-20/40 (Above 32Deg.F) | S | ||
| Engine Oil | w/o Filter | 4.00 QTS. | 3.78 L | API - SG or SG/CD, SAE 5W-30 (Below 60Deg.F), 10W-30 (Above -10Deg.F), 20W-20/40 (Above 32Deg.F) | S | ||
| Fuel Tank | 16.00 GALS. | 60.56 L | S | ||||
| Manual Transmission Fluid | 1.90 QTS. | 1.79 L | Hypoid Gear Oil or API - GL-4 or higher, SAE 75W-90 or 75W, 85W | S | |||
| Power Steering Fluid | 0.95 QTS. | 0.89 L | Automatic Transmission Fluid Plus Type 7176 (Preferred) or Automatic Transmission Fluid DEXRON II | S | |||
| Transfer Case Fluid | 0.52 QTS. | 0.49 L | API - GL-4 or higher, SAE 75W-90 or 75W, 85W | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.