Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPLYMOUTH1994LASER FWD L4-1997CC 2.0L DOHCREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSSERVICE SPECIFICATIONSVALVES
1994 Plymouth Laser FWD L4-1997cc 2.0L DOHC
Valves
1994 Plymouth Laser FWD L4-1997cc 2.0L DOHCSECTION Valves
Stem Diameter
Intake 0.2336-0.2343
Exhaust 0.2325-0.2332
Stem Tip Height
Intake 1.891
Exhaust 1.889
Face Angle 45.0-45.5°
Margin (Minimum)
Intake 0.041
Exhaust 0.037
All measurements given in inches, unless otherwise specified.
Intake 0.2336-0.2343
Exhaust 0.2325-0.2332
Stem Tip Height
Intake 1.891
Exhaust 1.889
Face Angle 45.0-45.5°
Margin (Minimum)
Intake 0.041
Exhaust 0.037
All measurements given in inches, unless otherwise specified.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.