SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPLYMOUTH1994GRAND VOYAGER BASE, 31THREPAIR AND DIAGNOSISENGINE PERFORMANCETESTING & DIAGNOSISENGINE CONTROLS - TESTS W/CODES - 2.5L TBICONNECTOR IDENTIFICATION
1994 Plymouth Grand Voyager Base, 31TH

Connector Identification

1994 Plymouth Grand Voyager Base, 31THSECTION Connector Identification
CONNECTOR IDENTIFICATION

Connector See
A/C Clutch Relay Fig 1 , Fig 2
Auto Shutdown (ASD) Relay Fig 4
Camshaft Sensor Fig 3
Crankshaft Sensor Fig 5
Engine Coolant Temperature (ECT) Sensor Fig 7
Evaporative Purge Solenoid Fig 8
Exhaust Gas Recirculation (EGR) Solenoid Fig 6
Fuel Pump Fig 9
Fuel Pump Relay Fig 10
Idle Air Control (IAC) Motor Fig 11
Intake Air Temperature (IAT) Sensor Fig 12
Manifold Absolute Pressure (MAP) Sensor Fig 13
Overdrive Solenoid Fig 14
Oxygen Sensor Fig 15
Powertrain Control Module (PCM) Fig 20
Torque Converter Clutch (TCC) Solenoid Fig 16
Throttle Position Sensor (TPS) Fig 17
Transmission Solenoid Fig 18
Transmission Temperature Sensor Fig 19
A/C CLUTCH RELAY CONNECTOR TERMINAL ID (AN BODY)

Terminal Wire Color Function
A Dark Blue Ignition 12-Volt Feed
B Gray Battery Voltage
C Dark Blue/Orange Control
D Dark Blue/Black Output
Fig 1: A/C Clutch Relay Connector Terminal ID (AN Body - 2.5L)
G94B65145Courtesy of CHRYSLER CORP.
A/C CLUTCH RELAY CONNECTOR TERMINAL ID (AN BODY)

Terminal Wire Color Function
A Dark Blue/White Ignition 12-Volt Feed
B Red/Light Blue Output
C Dark Blue/Orange Control
D Dark Blue/Black Battery Voltage
Fig 2: A/C Clutch Relay Connector Terminal ID (AS Body - 2.5L)
G94C65146Courtesy of CHRYSLER CORP.
CAMSHAFT POSITION SENSOR CONNECTOR TERMINAL ID

Terminal No. Wire Color Function
1 Orange 8-Volt Supply
2 Black/Light Blue Ground
3 Tan/Yellow Signal
Fig 3: Camshaft Sensor Connector Terminal ID (2.5L
G93J76520Courtesy of CHRYSLER CORP.
ASD RELAY CONNECTOR TERMINAL ID

Terminal Wire Color Function
A Dark Blue Fused Ign. Sw. Output
B Red/White Fused Battery Voltage
C Dark Blue/Yellow Relay Control
D Dark Green/Orange Relay Output
Fig 4: ASD Relay Connector Terminal ID - 1 Of 2 (2.5L)
G94B66200Courtesy of CHRYSLER CORP.
CRANKSHAFT POSITION SENSOR CONNECTOR TERMINAL ID

Terminal No. Wire Color Function
1 Orange 8-Volt Supply
2 Black/Light Blue Ground
3 Gray/Black Signal
Fig 5: Crankshaft Sensor Connector Terminal ID (2.5L)
G93B76522Courtesy of CHRYSLER CORP.
EGR SOLENOID CONNECTOR TERMINAL IDENTIFICATION

Terminal No. Wire Color Function
1 (1) Dark Blue Ignition 12-Volt Feed
2 Gray/Yellow Control
(1) Dark Blue/White on 2.5L AS body.
Fig 6: EGR Solenoid Connector Terminal ID (2.5L)
G94C65161Courtesy of CHRYSLER CORP.
ECT SENSOR CONNECTOR TERMINAL IDENTIFICATION

Terminal No. Wire Color Function
1 Tan/Black Signal
2 Black/Light Blue Ground
Fig 7: ECT Sensor Connector Terminal ID (2.5L)
G93D76540Courtesy of CHRYSLER CORP.
EVAPORATIVE PURGE SOLENOID CONNECTOR TERMINAL ID

Terminal No. Wire Color Function
1 (1) Dark Blue Ignition 12-Volt Feed
2 Pink/Black Control
(1) Dark Blue/White on 2.5L AS body.
Fig 8: Evaporative Purge Solenoid Connector Terminal ID (2.5L)
G94D65162Courtesy of CHRYSLER CORP.
FUEL PUMP CONNECTOR TERMINAL IDENTIFICATION

Terminal No. Wire Color Function
1 Dark Green/Black Fuel Pump Relay Output
2 Dark Blue Sending Unit Ground
3 n/a Not Used
4 Black/Tan Sending Unit Ground
5 Black Fuel Pump Ground
Fig 9: Fuel Pump Connector Terminal ID (2.5L)
G94E65163Courtesy of CHRYSLER CORP.
FUEL PUMP RELAY CONNECTOR TERMINAL ID

Terminal Wire Color Function
A (1) Dark Blue Fused Ign. Sw. Output
B (2) Red/White Fused Battery Voltage
C Dark Blue/Yellow ASD Relay Control
D Dark Green/Black Fuel Pump Relay Output
E n/a Not Used
(1) Dark Blue/White on AS body.
(2) Dark Green/White on AS body.
Fig 10: Fuel Pump Relay Connector Terminal ID (2.5L)
G94F65164Courtesy of CHRYSLER CORP.
IAC MOTOR CONNECTOR TERMINAL IDENTIFICATION

Terminal No. Wire Color Function
1 Gray/Red IAC Driver No. 3
2 Yellow/Black IAC Driver No. 2
3 Brown/White IAC Driver No. 1
4 Violet/Black IAC Driver No. 4
Fig 11: Idle Air Control (IAC) Motor Connector Terminal ID (2.5L)
G94G65165Courtesy of CHRYSLER CORP.
IAT SENSOR CONNECTOR TERMINAL ID

Terminal No. Wire Color Function
1 Black/Red Signal
2 Black/Light Blue Ground
Fig 12: IAT Sensor Connector Terminal ID (2.5L)
G94F66139Courtesy of CHRYSLER CORP.
MAP SENSOR CONNECTOR TERMINAL IDENTIFICATION

Terminal No. Wire Color Function
1 Black/Light Blue Ground
2 Dark Green/Red Signal
3 Violet/White 5-Volt Supply
Fig 13: MAP Sensor Connector Terminal ID (2.5L)
G94I66140Courtesy of CHRYSLER CORP.
OVERDRIVE SOLENOID CONNECTOR TERMINAL IDENTIFICATION

Terminal No. Wire Color Function
1 Orange/Black TCC Solenoid Control
2 Light Green/Black 12-Volt Supply
3 Brown Signal
Fig 14: Overdrive Solenoid Connector Terminal ID (2.5L)
G94G65157Courtesy of CHRYSLER CORP.
OXYGEN SENSOR CONNECTOR TERMINAL ID

Terminal No. Wire Color Function
1 Black/Light Blue Sensor Ground
2 Black/Dark Green Signal
3 Black/Tan Heater Ground
4 (1) Dark Green/Black Heater Feed
(1) Dark Green/Orange on AN body.
Fig 15: Oxygen Sensor Connector Terminal ID (2.5L)
G94J66141Courtesy of CHRYSLER CORP.
TCC SOLENOID CONNECTOR TERMINAL IDENTIFICATION

Terminal No. Wire Color Function
1 ** Not Used
2 Dark Blue Ignition 12-Volt Feed
3 Black Control
Fig 16: TCC Solenoid Connector Terminal ID (2.5L)
G94B66143Courtesy of CHRYSLER CORP.
TPS CONNECTOR TERMINAL IDENTIFICATION

Terminal No. Wire Color Function
1 Black/Light Blue Ground
2 Dark Blue Signal
3 Violet/White 5-Volt Supply
Fig 17: Throttle Position Sensor (TPS) Connector Terminal ID (2.5L)
G94C66144Courtesy of CHRYSLER CORP.
TRANSMISSION SOLENOID CONNECTOR TERMINAL ID

Terminal No. Wire Color Function
1 Brown Overdrive Solenoid Control
2 Dark Blue Ignition 12-Volt Feed
3 Orange/Black TCC Solenoid Control
Fig 18: Transmission Solenoid Connector Terminal ID (2.5L)
G94D66145Courtesy of CHRYSLER CORP.
TRANSMISSION TEMPERATURE SENSOR CONNECTOR TERMINAL ID

Terminal No. Wire Color Function
1 Violet Sensor Signal
2 Black/Light Blue Ground
Fig 19: Transmission Temperature Sensor Connector Terminal ID (2.5L)
G94E66146Courtesy of CHRYSLER CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.