Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPLYMOUTH1991LASER L4-1997CC 2.0L DOHCREPAIR AND DIAGNOSISSPECIFICATIONSCAPACITY SPECIFICATIONSDIFFERENTIAL ASSEMBLYSYSTEM SPECIFICATIONS
1991 Plymouth Laser L4-1997cc 2.0L DOHC
System Specifications
1991 Plymouth Laser L4-1997cc 2.0L DOHCSECTION System Specifications
Limited-Slip GL-5*
Standard GL-5
Above -10°F (-23°C), 90, 85W-90, 80W-90
-30° to -10°F (-34° to -23°C), 80 W, 80W-90
Below -30°F (-34°C), 75W
CAPACITY, Refill:
Conquest 1.3 Liters 2.8 Pints
Vista 4WD 1989-91 0.8 Liters 1.7 Pints
Vista 1992 0.7 Liters 1.5 Pints
Colt, Stealth 1.1 Liters 2.3 Pints
LIMITED-SLIP IDENTIFICATION: Lift rear of vehicle, turn one wheel and the other will turn in the same direction.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.