Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPLYMOUTH1985CONQUEST L4-2555CC 2.6L SOHC TURBOREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSTECHNICAL SERVICE BULLETINSALL TECHNICAL SERVICE BULLETINSECI DRIVEABILITY TESTER - USAGE
1985 Plymouth Conquest L4-2555cc 2.6L SOHC Turbo
ECI Driveability Tester - Usage
1985 Plymouth Conquest L4-2555cc 2.6L SOHC TurboSECTION ECI Driveability Tester - Usage
86chrysler11
Models
1984-1986 MMC Import Vehicles, Colt, Charger, Saporo, Vista
Ram 50,
Conquest
Subject
ECI Driveability Tester Usage
Index
FUEL
Date
July 28, 1986
No.
14-08-86
P-2759C
An ECI Checker was recently shipped to your dealership. Included with the checker was an instruction booklet and several harness connectors.
The instruction booklet provides the details on how to use the ECI Checker and harness connectors required for testing the electronic controlled ignition (ECI) system and the feedback carburetor (FBC) system used on 1984 through 1986 model year vehicles.
Please be sure to refer to the instruction booklet for proper procedures and harness applications for the vehicle and system being checked.
Listed below is a labor operation number for 0.6 hours. This is to be used whenever the ECI Checker is used on a vehicle for diagnosis.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No. 14-01-01-10 0.6 Hrs.
FAILURE CODE: RO - Driveability
Models
1984-1986 MMC Import Vehicles, Colt, Charger, Saporo, Vista
Ram 50,
Conquest
Subject
ECI Driveability Tester Usage
Index
FUEL
Date
July 28, 1986
No.
14-08-86
P-2759C
An ECI Checker was recently shipped to your dealership. Included with the checker was an instruction booklet and several harness connectors.
The instruction booklet provides the details on how to use the ECI Checker and harness connectors required for testing the electronic controlled ignition (ECI) system and the feedback carburetor (FBC) system used on 1984 through 1986 model year vehicles.
Please be sure to refer to the instruction booklet for proper procedures and harness applications for the vehicle and system being checked.
Listed below is a labor operation number for 0.6 hours. This is to be used whenever the ECI Checker is used on a vehicle for diagnosis.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No. 14-01-01-10 0.6 Hrs.
FAILURE CODE: RO - Driveability
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.