Torque Specifications

1984 Plymouth Horizon Base, 1.6 ASECTION Torque Specifications
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 1990 Plymouth Sundance, 1990 Plymouth Laser, 1990 Plymouth Horizon, 1990 Plymouth Acclaim, and 1990 Eagle Talon. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS (ZF 4HP-18)

Application Ft. Lbs. (N.m)
Catalytic Converter-to-Exhaust
"Y" Pipe 25 (34)
Crossmember-to-Side Support Nuts 44 (60)
Engine Cradle Bolts 44 (60)
Exhaust Pipe Bracket 23 (31)
Exhaust-to-Manifold Nuts 23 (31)
Filler Tube Nut 74 (100)
Splash Shield Bolts 21 (28)
Starter Bolts 31 (42)
Steering Knuckle Nuts 148 (200)
Throttle Cable Nuts 11 (15)
Torque Converter Bolts 24 (32)
Transaxle-to-Engine Bolts 32 (43)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.