CONFIGURE Mode

1984 Plymouth Horizon Base, 1.6 ASECTION CONFIGURE Mode
WARNING: This page is about a different car, the 1994 Plymouth Sundance, 1994 Plymouth Acclaim, 1994 Dodge Spirit, 1994 Dodge Shadow, and 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
  1. This mode allows user to customize DRB display. For example, if metric system is more useful, simply select METRIC from appropriate menu. All selections made under CONFIGURE mode will remain active until user changes selection.
  2. Enter DRB main menu to access CONFIGURE mode. See ENTERING DRB MAIN MENU. At DRB main menu, press "3" (CONFIGURE) key. Press ENTER key. DRB will display CONFIGURE menu.
NOTE: Because DRB is grounded through diagnostic connector, only one volt/ohmmeter test lead is required when using volt/ohmmeter mode. DRB volt/ohmmeter should only be used when required by self-diagnostic tests.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.