Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPLYMOUTH1984HORIZON BASE, 1.6 AREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 108 (SERVICING - M/T)LUBRICATIONCHECKING FLUID LEVEL
1984 Plymouth Horizon Base, 1.6 A
Checking Fluid Level
1984 Plymouth Horizon Base, 1.6 ASECTION Checking Fluid Level
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1991 Plymouth Sundance, 1991 Plymouth Laser, 1991 Plymouth Acclaim, 1991 Eagle Talon, and 1991 Dodge Spirit. However, it is still accessible from the selected car via links, so may be relevant.
- Check lubricant level at filler plug hole on left side of transaxle (on rear end cover). Lubricant should be level with bottom of filler plug hole.
- Fluid is drained by removing differential cover. Clean magnet. Use RTV sealant on differential cover.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.