SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPEUGEOT1982505 L4-2304CC 2.3L DSL XD-2REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINE
1982 Peugeot 505 L4-2304cc 2.3L DSL XD-2

Engine

1982 Peugeot 505 L4-2304cc 2.3L DSL XD-2SECTION Engine
Engine Tightening Specifications





Cylinder Head Tightening Sequence

Fig. 1 Cylinder head torque sequence.:





Install cylinder head.

Torque in sequence, Fig. 1:

- On XD2 and XD2C engines, pretorque to 21.75 ft. lbs. (3 m-kg), then torque to 47.13 ft. lbs. (6.5 m-kg). Then loosen each bolt 1/4 turn and retorque to 47.13 ft. lbs.

- On XD2S engines, pretorque to 21.75 ft. lbs., then to 50.75 ft. lbs. (7 m-kg). Loosen each bolt 1/4 turn and retorque to 50.75 ft. lbs.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.