SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004ALERO GLS, 4D SEDANREPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR BODY PANELSBODY FRONT ENDREPAIR INSTRUCTIONSFRONT FENDER LINER REPLACEMENTINSTALLATION PROCEDURE
2004 Oldsmobile Alero GLS, 4D Sedan

Installation Procedure

2004 Oldsmobile Alero GLS, 4D SedanSECTION Installation Procedure
    Fig 1: View Of Front Fender Liner At The Fender
    GM276965Courtesy of GENERAL MOTORS CORP.
  1. Position the fender liner (3) to the front fender.
  2. Install the push-in retainers (4).
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the screws to the fender liner to the fender.

    Tighten:  Tighten the fender liner screws to 2 N.m (18 lb in).

    4. Fig 2: View Of Front Fender Liner At The Front Bumper Fascia
    GM330141Courtesy of GENERAL MOTORS CORP.
  4. Install the bolts to the front fender liner to the front bumper fascia.

    Tighten:  Tighten the fender liner bolts to 2 N.m (18 lb in).

  5. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  6. Lower the vehicle.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.