Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE1998AURORA V8-4.0L VIN CREPAIR AND DIAGNOSISRELAYS AND MODULESRELAYS AND MODULES - POWERTRAIN MANAGEMENTRELAYS AND MODULES - COMPUTERS AND CONTROL SYSTEMSENGINE CONTROL MODULEDESCRIPTION AND OPERATION
1998 Oldsmobile Aurora V8-4.0L VIN C
Engine Control Module: Description and Operation
1998 Oldsmobile Aurora V8-4.0L VIN CSECTION Description and Operation
Description of Operation
The Control Module supplies a buffered voltage to various sensors and switches. The input and output devices in the control module include an analog to digital converters, signal buffers, counters, and special drivers. The Control Module controls most components with electronic switches which complete a ground circuit when turned ON. These switches are arranged in groups of 4 and 7 called one of the following:
^ Quad Driver Module
^ Output Driver Modules
The surface mounted Quad Driver Module can independently control up to 4 outputs (PCM terminals). The Output Driver Modules can independently control up to 7 outputs. Not all outputs are always used.
The Control Module supplies a buffered voltage to various sensors and switches. The input and output devices in the control module include an analog to digital converters, signal buffers, counters, and special drivers. The Control Module controls most components with electronic switches which complete a ground circuit when turned ON. These switches are arranged in groups of 4 and 7 called one of the following:
^ Quad Driver Module
^ Output Driver Modules
The surface mounted Quad Driver Module can independently control up to 4 outputs (PCM terminals). The Output Driver Modules can independently control up to 7 outputs. Not all outputs are always used.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.