Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE1995CUTLASS CIERA L4-2.2L VIN 4REPAIR AND DIAGNOSISMAINTENANCEALIGNMENTSPECIFICATIONSALIGNMENT SPECIFICATIONSFRONT ALIGNMENT SPECIFICATIONS
1995 Oldsmobile Cutlass Ciera L4-2.2L VIN 4
Front Alignment Specifications
1995 Oldsmobile Cutlass Ciera L4-2.2L VIN 4SECTION Front Alignment Specifications
Caster Angle, Degrees [01]
Limits +2.3 to +3.7
Desired +3
Camber Angle, Degrees
Limits
Left - .5 to +.5
Right - .5 to +.5
Desired
Left 0
Right 0
Total Toe, Degrees -.2 to +.2
Ball Joint Wear [02]
[01] Non-adjustable.
[02] Refer to Ball Joint Inspection under Steering and Suspension/Suspension/Ball Joint, Lower/Service and Repair for proper inspection of ball joints.
Limits +2.3 to +3.7
Desired +3
Camber Angle, Degrees
Limits
Left - .5 to +.5
Right - .5 to +.5
Desired
Left 0
Right 0
Total Toe, Degrees -.2 to +.2
Ball Joint Wear [02]
[01] Non-adjustable.
[02] Refer to Ball Joint Inspection under Steering and Suspension/Suspension/Ball Joint, Lower/Service and Repair for proper inspection of ball joints.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.