Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE1987FIRENZA CRUISER, 2.0 1, STANDARDREPAIR AND DIAGNOSISQUICK LOOKUPSFLUIDS
1987 Oldsmobile Firenza Cruiser, 2.0 1, Standard
Quick Lookups: Fluids
1987 Oldsmobile Firenza Cruiser, 2.0 1, StandardSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Engine Coolant | 2.0L Eng,Eng VIN 1 | 11.25 QTS. | 10.64 L | 50/50 mixture of Ethylene Glycol Base Antifreeze and water | GM Specification 1825-M. | S | |
| Engine Coolant | 2.0L Eng,Eng VIN 1 | w/Air Cond | 12.00 QTS. | 11.35 L | 50/50 mixture of Ethylene Glycol Base Antifreeze and water | GM Specification 1825-M. | S |
| Engine Oil | 2.0L Eng | 4.00 QTS. | 3.78 L | SAE 5W-30 (Preferred) (Below -20Deg.F to over 100Deg.F), 10W-30 (0Deg. to over 100Deg.F), 30 (40Deg.F to over 100Deg.F) | S | ||
| Fuel Tank | 13.50 GALS. | 51.1 L | S | ||||
| Manual Transmission Fluid | 4 Spd Trans | 3.00 QTS. | 2.83 L | S | |||
| Power Steering Fluid | Complete System | 2.25 PTS. | 1.06 L | GM Power Steering Fluid | GM Part No. 1050017. | S | |
| Power Steering Fluid | w/Pump | 1.00 PTS. | 0.47 L | GM Power Steering Fluid | GM Part No. 1050017. | S | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.